Epoxy Table top Resin 1kg

HARDNER 1 Measure accurately by Weight, not Volume. Pour the hardener component [Part-B] into the Resin Component Part A and mix well to homogeneity. Resin components Part A & Part B should be mixed thoroughly using a slow speed drill or hand paddle for 5 minutes and ensure that a homogenous mix with uniform colour is obtained. Then add Pigments and mix well.

Craft Resin is safe to use, non-hazardous It is formulated using the highest quality materials and therefore produces no VOCs or fumes. It is a clean system, meaning there are no solvents or non-reactive diluents—everything in it reacts so nothing is free to become airborne and cause health issues. It is also non-flammable and is applicator friendly.

Some people think that adding more hardener will make the cure harder, or cause it to cure faster. Adding too much of either the resin or the hardener will alter the chemical reaction and your resin will not cure properly.

Once you’ve ensured your mixing ratio is accurate. it’s important to mix both parts together thoroughly. Again, if any material cannot catalyze properly by any means, including not being blended well enough, it will not be able to cure fully. Mixing vigorously for 5 solid minutes, scraping the sides and bottom of the container, should ensure everything can thoroughly catalyze. If bubbles appear, don’t worry—you can take care of them after pouring with Flame Gun.

Water and Resin are not friends: Even the tiniest drop of water or other contaminant can cause a host of problems, including cloudiness, bubbles and an improper cure. Ensure your measuring cups, mixing cups, stirring spatulas and spreaders are all completely clean and dry for best results!

Resin is formulated using the highest quality materials and therefore produces no VOCs or fumes. It is a clean system, meaning there are no solvents or non-reactive diluents—everything in it reacts so nothing is free to become airborne and cause health issues. It is also non-flammable. Crystal Resin has only a low odor and is applicator friendly.